by WaterHeat Applications | Oct 4, 2022
Cool Weather Package Hot gas defrost for frost forming ambient temperatures (<50°F/10°C ). Why it’s critical: Maintains thermal efficiency. Prevents moisture buildup on the evaporator coil, which can impede heat transfer by insulating and limiting...
by WaterHeat Applications | Nov 5, 2021
See Maintenance section of unit Manual for more information. Periodic Maintenance: De-scale/de-lime the potable circuit by isolating the unit and back flushing with a potable acidic solution such as vinegar or commercially available de-liming products. *Wash blue...
by WaterHeat Applications | Feb 19, 2021
Solution: Use one of the following workflows: Import .step file into AutoCAD. Export the file from AutoCAD as 3D DWG and then import into Revit.Import .ICF file into Revit. Source: Autodesk Support
by WaterHeat Applications | Oct 1, 2020
A byproduct of moving heat with a heat pump from air leaves us with a cooled air stream. Summer Operation: This cool waist stream can be used to provide supplement cooling. Winter Operation: Warm building exhaust can be utilized as a heat source rather than rejecting...
by WaterHeat Applications | Jun 24, 2020
As entering water temperature increases, refrigerant pressure increases. The compressor is forced to work harder, which increases power consumption while decreasing heating capacity. As a result, higher entering water temperature yields a lower COP, while lower...
